华为 USG6000 系列防火墙重置管理员密码

前任 IT 留下来的华为 USG6000 防火墙莫名其妙的重置了 DHCP 配置,开发原来使用的 IP 不能用了。然而前任 IT 忘记了登陆密码,不得不折腾一下密码重置。

1# 清除密码

绿联的 Console 线用的 FT232R 芯片,可以直接通过 Windows 安装驱动。在设备管理器的 端口 中确定 COM 序号后使用 Putty 链接到 USG6000 的 Console 口,然后重启设备。

出现 Press Ctrl+B to Enter Main Menu...3 时按 Ctrl+B ,输入 BootROM 密码进入主菜单。 USG6000 的 BootROM 默认密码为 O&m15213

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
Press Ctrl+B to Enter Main Menu...3                                            
Password: ********


For the sake of security, please modify the original password.


====================< Extend Main Menu >====================
| <1> Boot System |
| <2> Set Startup Application Software and Configuration |
| <3> File Management Menu... |
| <4> Load and Upgrade Menu... |
| <5> Modify Bootrom Password |
| <6> Reset Factory Configuration |
| <0> Reboot |
| ---------------------------------------------------------|
| Press Ctrl+T to Enter Manufacture Test Menu... |
| Press Ctrl+Z to Enter Diagnose Menu... |
============================================================
Enter your choice(0-6): 5 // 修改 BootROM 密码

Change Password.

Old Password: ********

New Password: *********

Confirm Password: *********

Save new password ... Done.

====================< Extend Main Menu >====================
| <1> Boot System |
| <2> Set Startup Application Software and Configuration |
| <3> File Management Menu... |
| <4> Load and Upgrade Menu... |
| <5> Modify Bootrom Password |
| <6> Reset Factory Configuration |
| <0> Reboot |
| ---------------------------------------------------------|
| Press Ctrl+T to Enter Manufacture Test Menu... |
| Press Ctrl+Z to Enter Diagnose Menu... |
============================================================
Enter your choice(0-6): 2 //进入设置启动文件和配置文件的子菜单。

Current boot application software: <hda1:/sup.bin>
Current boot configuration: <hda1:/vrpcfg.zip>
<1> Modify setting
<0> Quit
Enter your choice (0-1): 1 //进入修改配置子菜单。

File(s) in hda1:

1:hda1:/sup.bin 139720443 bytes
2:hda1:/vrpcfg.zip 17142 bytes
Total size: 1201569792 bytes.
Free size: 1061832207 bytes.

File(s) in hda2:

1:hda2:/keylog/log_1389968546.txt 442185 bytes
Total size: 640745472 bytes.
Free size: 640253952 bytes.


Input the name of application software(eg: hda1:/sup.bin): // 留空即可

Input the name of configuration or '.' to clear setting(eg: hda1:/vrpcfg.zip):. // 清空配置

Modifed configuration successful.
Next boot configuration: NULL

====================< Extend Main Menu >====================
| <1> Boot System |
| <2> Set Startup Application Software and Configuration |
| <3> File Management Menu... |
| <4> Load and Upgrade Menu... |
| <5> Modify Bootrom Password |
| <6> Reset Factory Configuration |
| <0> Reboot |
| ---------------------------------------------------------|
| Press Ctrl+T to Enter Manufacture Test Menu... |
| Press Ctrl+Z to Enter Diagnose Menu... |
============================================================
Enter your choice(0-6): 1 // 启动

启动(实测2分钟左右)后可以拔掉 Console 线,找一根网线插入 MGMT 接口,配置笔记本 IPv4 192.168.0.2 , 网关为 192.168.0.1 ,掩码 255.255.255.0 ,然后浏览器打开 192.168.0.1:8443

输入默认的账号: admin ,密码: Admin@123 后即可成功登陆 Web 系统。

2# 修改密码

0%